The Most Advanced 4-port 10GbE SFP+ Ethernet Controller in the Market
STG-i4S je advanced, market-leading 10GbE SFP+ controller. Toto rozširuje virtualizáciu podľa servera úrovne do úrovne siete, a kombinuje s hardvérom optimizácie a offloads. It provides unmatched features for virtualization,
flexibility pre siete LAN a SAN, reliable performance. To je najlepší výber pre rýchle šírenie siete v agile data center.

Key Features
Quad SFP+ Connectors
Štandard Low Profile Form Factor
PCI Express 3.0 (8GT/s)
Network Virtualization Offloads including VXLAN and NVGRE
Small Packet Performance
Dáta Plane Developer Kit for efficient packet processing
Low Power Consumption
Intel® Flow Director
Intelligent Offloads
Unified networking providing a single with support wire support for LAN and storage
Asset Management Features
RoHS compliant 6/6
Supports Both Direct Attach Copper and Fiber Cables

Specifications

General

• Quad LAN with Intel® X710 Family Controller
  –Low Profile Standard form factor
  –PCI-E 3.0 x8 (8GT/s) interface
  –Quad SFP+ konektory so speed up to 10Gbps per port
  –Load balancing on multiple CPUs
  –Intel® PROSet Utility pre Windows Device Manager
  –Time Sync (IEEE 1588)
  –Energy Efficient Ethernet (EEE)
  
  I/O Features
  –Intel® Flow Director
  –MSI-X support
  –Multiple Queues: 1,536 TX a RX queues per port
  –Tx/Rx IP, SCTP, TCP a UDP checksum offloading (IPv4, IPv6) capabilities
  –Jumbo Frame (9.5KB)
  
  Virtualization Features
  –Next-Generation VMDq with up to 256 VMDq VMs supported
  –PCI-SIG SR-IOV with up to 128 virtual ports
  –Virtual Machine Load Balancing (VMLB)
  –Advanced Packet Filtering
  –VLAN support for up to 4096 VLAN tags
  –VXLAN a NVGRE support
  
  Storage Interface Features
  –Preboot eXecution Environment (PXE) support
  –iSCSI remote boot
  –Simple Network Management Protocol (SNMP) a Remote Network Monitoring (RMON) static counters
  
  Management Features
  –Asset Management support on Supermicro® X10 generation platforms
  –Controller asset tags such as časť, revision, serial number, a MAC addresses
  –Controller thermal sensor
  
  Advanced Software Features
  –Teaming support
  –IEEE 802.3ad (link aggregation control protocol)
  –IEEE 802.1Q VLANs
  –IEEE 802.3 2005 flow control support
  –IEEE 802.1p
  –TCP segmentation/large send offload
  –Interrupt moderation
  
  OS Support
  –Windows® Server 2012 R2, 2012, 2008 R2 X86-64
  –Linux RedHat EL 6.5 a 7.0 IA-32, X86-64, a IA-64
  –Linux SuSE SLES 11 SP3 a 12 IA-32, X86-64, a IA-64
  –FreeBSD 9 a 10 IA-32, X86-64, a IA-64
  –UEFI 2.1 a 2.3 X86-64 a I-64
  –VMware ESXi 5.1 a ESXi 5.5 X86-64
  
  Cable Support
  –SFP+ direct attach twinaxial copper cables up to 7m
  –Fiber-optické káble (s required optional SFP+ transceivers)
  
  Power Consumption
  –Typical power consumption: 4W
  –Maximum power consumption: 8W
  
  Operating Conditions
  –Operating temperature: 0 až 55 °C (32 až 131 °F)
  –Storage temperature: -40 °C až 70 °C (-40 °F až 158 °F)
  –Storage humidity: 90% non-condensing relative humidity pri 35°C
  
  Physical Dimensions
  –Card PCB dimensions: 14.99cm (5.9in) x 6.90cm (2.73in) (L x H)
  –Height of end brackets: štandard – 12cm (4.725in), low-profile – 7.94cm (3.13in)
  
  Optional Accessories:
  –AOC-E10GSFPSR: SFP+ transceiver module for short range fiber cables (up to 300m)
  –AOC-E10GSFPLR: SFP+ transceiver module pre dlhé range fiber cables (up to 3000m)
  –AOC-TSR-FS: SFP+ transceiver module for short range fiber cables (up to 300m)
  –CBL-0347L: 39.37” (100cm) 10GbE SFP+ do SFP+, Twinaxial copper cable
  –CBL-0348L: 118.11” (300cm) 10GbE SFP+ do SFP+, Twinaxial copper cable
  –CBL-0349L: 196.85” (500cm) 10GbE SFP+ do SFP+, Twinaxial copper cable
  
  Supported Platforms
  –Supermicro motherboards with minimum jeden PCI-E x8 slot
  –Supermicro® serverové systémy s minimom jedného low-profile or full-height PCI-E x8 expansion slot